Why You Should Hire a Glazier to Repair Double Glazing Seals
If window seals fail it can lead to more energy bills and foggy windows. If you don't address the issue, it will only make it worse and hiring an expert glazier to fix the damaged seals is a smart move.
Window seals play a crucial role in the insulative benefit that double glazing offers. Fortunately, they're easy to repair and can save you money over the long haul.
Take off the Old Seal
The seals could break for many reasons. They can be damaged because of inadequate installation or break over the years from normal wear and tear. While it's impossible to completely stop a window seal from breaking, taking a few precautions can ensure that the problem is less likely to occur. For example, avoiding using the power wash on your windows can help to reduce the risk of damage caused by high pressure water. Check that the manufacturer of the windows does not advise using reflective window films as they can cause damage to the seal.
In the case of double glazed windows, the most typical indication that a seal has been broken is the appearance of condensation between the two glass panes. This happens when the inert gas that is sealed by vacuum such as argon or krypton, that was between the two panes of glass has disappeared. When this happens, the window will no longer be able to keep moisture and cold air out of your home.
The good news is that fixing a damaged window seal is not difficult. A new wedge gasket can be bought at any hardware store. It should be simple to install in your uPVC window. If you're concerned that you'll be unable to install the new seal correctly spray water on the frame of the window to help lubricate it.
It's important that you check the grooves on the window frame prior to installing the new seal. This could include melting uPVC pieces that are often leftover from previous repairs. You can use a chisel to take away these areas before you start the repair. This will ensure that the new rubber seal fits properly into your window frame.
It is possible to fix an infected uPVC seal on your own, but it's best to leave it to the experts. double glazing repair Dunstable has the skills and tools necessary to complete this job quickly and efficiently, while ensuring the least risk of damaging your uPVC windows.
Clean the Surface
Double glazing windows can help reduce noise pollution if they are installed and maintained correctly. A broken window seal can allow moisture and air to enter, which can cause a variety of problems such as condensation. The presence of moisture on the inside of the glass pane isn't just unsightly, but it could cause mould to grow and damage the frame which is why it is necessary to have a professional repair. Other indicators of a damaged seal include a draft, which can be uncomfortable and expensive to heat, or a distortion in the glass that could cause light transmission to be affected and alter the view.
Double-glazed windows can be repaired easily, especially if you catch the issue early. While it is possible to complete the job yourself, a professional is usually recommended as they have the expertise and access to high-quality materials that will provide long-lasting results.
To begin, you'll have to take off any silicone sealant that is already present. This can be done with a sharp knife. After this, the surface should be thoroughly cleaned to remove any dirt or debris that might have accumulated. When the surface is clean the next step is to re-seal the window.
Before resealing the unit first, turn the bottom pane upside down so the glass face that was inside the sealed unit faces upwards. The surface must be thoroughly cleaned with dry, clean cloth.
Drilling holes into windows with double glazing is not an ideal idea. However, to save money and avoid the need for an emergency call-out to the emergency services, you can drill small holes to place a desiccate pack which will absorb any moisture between the two glass panes. The hole could then be cleaned with ruby alcohol (isopropyl) to stop the growth of mould.
Double-glazed windows are constructed to last for a long time, but they can and do break down and a lot of people are in need of a professional double glazing repair. The majority of the time, window seals fail when there is condensation between the glass panes, or if there are drafts.
Apply for a New Seal
Whether you've recently moved into a new home or have just had your double-glazed windows installed window seals play an significant role in maintaining an airtight and energy efficient glass-to frame connection. As time passes, seals may be damaged by weather conditions and other external factors. It is essential to replace damaged seals as fast as possible. This will stop water from getting in between the glass panes, which can lead to condensation, a reduction in energy efficiency and even water damage to your property.
It is best to pick a day with low rainfall while you're performing this task. You will be working with the window open and don't need much rainwater to get into your home. This could cause damage to the new seals. Wear eye protection when using power tools to take off old window seals. It's easy to get dust or debris into your eyes.
Once you've removed the old seal, it's important to clean the surface before applying a new one. Clear the area with a utility knife or putty and then apply a fresh coat of silicone caulking. Be sure to add an globule of the caulking to the outside of the frame too as this will help to make an airtight and waterproof seal around the glass.
It's also a good idea to paint the exterior of your window frames since this will help to shield them from the elements. This is a good way to protect the integrity of your window, particularly during hot temperatures.
You can reseal the windows yourself, but in the event of a major issue, it is recommended to call a professional company that specializes in window sealing. You can be assured that the new seals are installed correctly, ensuring your windows remain energy efficient and safe.
Allow the seal to set
Double-glazed windows are a fantastic option for homeowners since they shield against the elements and keep the heat generated by heating systems in. They also block sunlight from escaping. It is only able to do this if the window seal is properly installed. A failed seal can cause mist and condensation to form between glass panes. It can also lead to energy loss, draughts, and even security issues. It is therefore important to fix a damaged seal as soon as possible in order to avoid damage to the window and your home.
One of the easiest methods to determine if the window seal is failing is to feel for draughts or cold coming in around the corners of the frame. If you feel it, the window gasket is sagging and is no longer creating an airtight seal. Another way to check is to look for signs of misting and condensation between the glass panes of your double-glazed windows. Both of these issues are caused by a leak in the double-glazed window seal. This allows moisture to enter the section, compromising its insulation properties.
There are kits to reseal the double glazing seals available if you are a DIY enthusiast. These kits usually require drilling a small hole into the window and then cleaning it using a magnet. They then put in drying pellets that disappear and then plug the hole with clear concrete. However, while these kits do have a good track record of providing quick results, they do tend to need doing more often than professionally-installed windows and they don't always provide a lasting solution.
It is important to let the sealant dry completely prior to using it, regardless of whether you replaced your window seals by yourself or hired an expert. It may take some days or some weeks to cure the sealant, so you should wait until that time to open the window. A window that's been sealed should be treated with care and care It's best to lay an old duvet or towel down on your work surface to protect it from stains and scratches.